Yep, we may get a tiny thank-you (read: commission) when you buy through
links on Toolhuntr — not enough for a yacht, but enough to keep the lights (and
servers) on.
Learn more
110
Highlights
71
Differences
7
Reactions
0
Likes
Makita LS1018
vs
Makita LS1019L:
110 Highlights & 71 Differences —
Which Miter Saw Offers Superior Precision And Durability?
Find out if higher-end features justify the cost. Decide which saw aligns with your expectations.
Trying to decide between Makita LS1018 and Makita LS1019L? This miter saws comparison covers features, design, and key motor type, intended use, construction class & soft start buyers care about.
Makita LS1018 vs. LS1019L: Two Professional Sliding Compound Miter Saws Face Off
For woodworking pros and enthusiastic DIYers alike, Makita's sliding compound miter saws are well known for delivering precision and power. The LS1018 and LS1019L models share the hallmark features expected in professional tools: both use corded power sources, have dual bevel capabilities, and sport 10-inch blades designed for clean, accurate cuts. Each saw incorporates safety-enhancing electric brakes and soft start systems that reduce startup shocks and increase operator control. However, beneath these surface similarities lie critical differences in motor tech, build quality, precision aids, and overall usability that can sway your choice considerably.
Makita LS1018: Dependable Simplicity Meets Budget-Friendly Power
The LS1018 is a sliding compound miter saw aimed at professionals who appreciate reliability without complexity. Its brushed motor delivers an impressive 4,300 RPM blade speed, the highest among the two, which means faster cuts for general applications. Despite lacking a reinforced pivot or metal gear construction ; features found in its sibling ; the LS1018 is built for durability aligned with typical professional site demands. It's compact and lightweight with a 35-pound shipping weight, making transport and setup easier.
Although this model skips advanced precision features, its dual bevel adds versatility for common angled cuts. The LS1018 also maintains compliance with OSHA and UL standards, ensuring baseline safety on job sites. However, ergonomic amenities like anti-vibration handles or rubberized feet are not present, so users may feel more vibration and noise (4.5 on the scale) compared to its counterpart.
Inexpensive and straightforward, the LS1018 offers a solid mix of power and portability without frills. You can find it priced affordably at around $300 at Amazon.com.
Makita LS1019L: The Advanced Craftsman's Choice for Precision and Comfort
The LS1019L elevates the miter saw experience by embracing a brushless motor design. This brushless motor provides increased efficiency, less maintenance, and longer lifespan than the LS1018's brushed motor. Although the blade speed is a slightly reduced 3,200 RPM, the motor delivers steady power with refined torque control, achieving optimal cutting performance especially for demanding jobs.
Where the LS1019L really shines is in its thoughtful features focused on precision and operator safety. It offers fine miter adjustments and an included work clamp, enabling more accurate cuts that hold materials securely. Robust build components like a reinforced pivot mechanism and metal gears enhance durability for heavy-duty use.
The Makita LS1018 wins with its high blade speed and budget-friendly design, great for pros who need dependable performance without bells and whistles. Meanwhile, the LS1019L brings technological advances like a brushless motor, precision fine-tuning, and added safety features, boosting reliability and comfort for heavy usage.
Bottom Line
If you want an affordable, straightforward sliding compound miter saw that packs raw speed and portability, the LS1018 is a solid choice for many professionals and serious DIYers. However, if your projects demand exacting accuracy, enhanced durability, and user-friendly innovations including safety enhancements, the LS1019L justifies the premium investment and stands as the superior tool for intensive professional applications.
Verdict
Winner: Makita LS1019L - Because its brushless motor, precise fine miter adjustment, and enhanced safety features make it a clear leader for professional-grade use.
Runner-up: Makita LS1018 - A robust and reliable miter saw that delivers strong performance and value for those on a tighter budget or with simpler needs.
Side by side. The numbers. The features. No drama.
Can’t decide between Makita LS1018 and Makita LS1019L? This in-depth miter saws breakdown highlights what makes each product unique — from standout features and hidden quirks to pricing, performance, and what actual users are saying.
48
Makita LS1018
0Votes
DIY, Home Improvement, Professional
54
Makita LS1019L
0Votes
Professional
vs
Intended Use
Makita LS1018 is designed for DIY, Home Improvement, and Professional uses, providing versatility. Makita LS1019L targets Professional use only, focusing on higher-end applications. LS1018 is better for broader user groups.
Describes the primary usage environment for the saw.
In the battle of Intended Use,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
6 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Intended Use on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Makita LS1018 uses a Brushed motor, while Makita LS1019L is equipped with a Brushless motor. Brushless motors in LS1019L generally offer better efficiency and longer life, making LS1019L superior in motor technology.
Indicates the motor technology used inside the saw.
In the battle of Motor Type,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
53 score
measurement.
Based on community votes for Motor Type,
Makita LS1018 ◉ earned
0 votes,
less than
Makita LS1019L ◉,
which got 1 votes.
Reflects the structural robustness level of the tool.
In the battle of Construction Class,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
33 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Construction Class on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Miter Saw Category
What category of miter saw is this?
91
Makita LS1018
0Votes
Sliding Compound
94
Makita LS1019L
0Votes
Dual Bevel
vs
Miter Saw Category
Makita LS1018 is a Sliding Compound miter saw, whereas Makita LS1019L features Dual Bevel capability. The dual bevel of LS1019L allows for more versatile bevel cuts on both sides, making LS1019L more suitable for advanced cutting needs.
Defines the structural configuration and cutting capability class.
In the battle of Miter Saw Category,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
3 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Miter Saw Category on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Power Source Type
What is the power source type?
41
Makita LS1018
0Votes
Corded
44
Makita LS1019L
0Votes
Corded
vs
Power Source Type
Both Makita LS1018 and Makita LS1019L are corded power tools, offering consistent power supply without battery limitations. This makes both suitable for extended work sessions requiring reliable power.
Specifies whether the saw operates via electrical cord or battery power.
In the battle of Power Source Type,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
3 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Power Source Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Country of Manufacture
Where is it manufactured?
61
Makita LS1018
0Votes
Japan
79
Makita LS1019L
0Votes
Japan
Indicates the country where the saw is manufactured.
In the battle of Country of Manufacture,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
18 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Country of Manufacture on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Release Year
What year was it released?
21
Makita LS1018
0Votes
2012
54
Makita LS1019L
0Votes
2018
Shows the year the model was introduced to market.
In the battle of Release Year,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
33 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Release Year on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Certification Standards
What certifications does it have?
53
Makita LS1018
0Votes
UL, CSA, ETL
44
Makita LS1019L
0Votes
UL, CSA
Indicates compliance with recognized safety and quality standards.
In the battle of Certification Standards,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
9 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Certification Standards on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Warranty Length
What is the warranty length?
1
Makita LS1018
0Votes
1 Year
27
Makita LS1019L
0Votes
1 Year
Specifies the manufacturer warranty coverage period.
In the battle of Warranty Length,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
26 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Warranty Length on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
User Skill Level
What skill level is this suitable for?
91
Makita LS1018
0Votes
Professional
94
Makita LS1019L
0Votes
Professional
vs
User Skill Level
Both Makita LS1018 and Makita LS1019L are rated for Professional user skill level, ensuring they meet the demands of experienced users.
Indicates the recommended operator experience level.
In the battle of User Skill Level,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
3 score
measurement.
Don’t keep it to yourself — be the first to react and review the
User Skill Level on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Makita LS1018 has a maximum output torque of 50 lb-ft, significantly higher than Makita LS1019L's 4.6 lb-ft, making LS1018 better suited for heavy-duty cutting requiring higher torque.
Measures peak torque output under load.
In the battle of Maximum Output Torque,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
45.4 lb-ft
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Output Torque on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
The Soft Start feature is present in both Makita LS1018 and LS1019L, allowing a smoother and safer motor start-up.
Gradually increases motor speed to reduce startup shock.
In the battle of Soft Start,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Soft Start on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Power Consumption
What is the power consumption?
1,800
Watt
0Votes
1,800
Watt
0Votes
Makita LS1018
The motor consumes 1800 Watt, indicating powerful performance suitable for demanding cutting tasks.
Makita LS1019L
Power consumption is 1800 Watt, which indicates the motor's approximate electrical draw under typical load and helps size breakers or generators.
Shows total electrical power usage during operation.
In the battle of Power Consumption,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
1,800.00 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Power Consumption on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Motor Voltage
What voltage does it operate on?
120
Volt
0Votes
120
Volt
0Votes
Makita LS1019L
Operates at 120 Volt, the standard North American mains voltage, so it requires a properly rated outlet and circuit.
Specifies the operating voltage requirement.
In the battle of Motor Voltage,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
120.00 Volt
measurement.
Don’t keep it to yourself — be the first to react and review the
Motor Voltage on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Motor Amperage
What is the motor amperage?
13
Amp
0Votes
15
Amp
0Votes
Makita LS1018
The motor draws 13 Amp current, providing a measure of electrical consumption under typical load.
Shows the current draw under rated load.
In the battle of Motor Amperage,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
2.0 Amp
measurement.
Don’t keep it to yourself — be the first to react and review the
Motor Amperage on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Drive Type
What type of drive system is used?
81
Makita LS1018
0Votes
Direct Drive
94
Makita LS1019L
0Votes
Direct Drive
Makita LS1018
The saw uses a direct drive system, transmitting motor power directly to the blade for efficient cutting and less maintenance.
Defines how power transfers from motor to blade.
In the battle of Drive Type,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
13 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Drive Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Cord Length
What is the cord length?
8
ft
0Votes
10
ft
0Votes
vs
Cord Length
Makita LS1018 has an 8 ft cord length, while Makita LS1019L offers a longer 10 ft cord. The LS1019L's extended reach makes it more convenient for larger workspaces.
Length of the power cord for mobility.
In the battle of Cord Length,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
2.0 ft
measurement.
Don’t keep it to yourself — be the first to react and review the
Cord Length on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Peak Horsepower
What is the peak horsepower?
2.5
HP
0Votes
15
HP
0Votes
Makita LS1019L
Peak horsepower is 15 HP (≈ 11.19 kW), representing short-term peak power available under heavy load for demanding cuts.
Indicates peak horsepower rating of the motor.
In the battle of Peak Horsepower,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
12.5 HP
measurement.
Don’t keep it to yourself — be the first to react and review the
Peak Horsepower on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Motor Power
What is the motor power?
15
Watt
0Votes
1,800
Watt
0Votes
Indicates the rated motor power output for cutting performance.
In the battle of Motor Power,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
1,785.0 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Motor Power on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Motor Frequency
What is the motor frequency?
60
Hz
0Votes
60
Hz
0Votes
Defines the AC power frequency compatibility.
In the battle of Motor Frequency,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
60.00 Hz
measurement.
Don’t keep it to yourself — be the first to react and review the
Motor Frequency on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
No Load Speed
What is the no-load speed?
4,300
RPM
0Votes
3,200
RPM
0Votes
Indicates blade rotation speed without load.
In the battle of No Load Speed,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
1,100.0 RPM
measurement.
Don’t keep it to yourself — be the first to react and review the
No Load Speed on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Battery Platform Compatibility
Which battery platform is compatible?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
Who knows?
0Votes
Makita LS1019L
(Help us out by suggesting one!)
Indicates which battery platform is compatible with the saw.
Don’t keep it to yourself — be the first to react and review the
Battery Platform Compatibility on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Battery
Is a battery included?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates whether a battery is included (cordless models).
In the battle of Battery,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Battery on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Charger
Is a charger included?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates whether a charger is included.
In the battle of Charger,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Charger on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Recommended Generator Size
What generator size is recommended?
2,000
Watt
0Votes
2,000
Watt
0Votes
vs
Recommended Generator Size
The Recommended Generator Size for both Makita LS1018 and LS1019L is 2000 Watts, indicating similar power requirements for generator backup.
Minimum generator output recommended for safe operation.
In the battle of Recommended Generator Size,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
2,000.00 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Recommended Generator Size on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Thermal Overload Protection
Does it have thermal overload protection?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Protects motor from overheating damage.
In the battle of Thermal Overload Protection,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Thermal Overload Protection on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Power Indicator Light
Does it have a power indicator light?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Visual indicator showing power status.
In the battle of Power Indicator Light,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Indicator Light on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Restart Protection
Does it have restart protection?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Prevents automatic restart after power interruption.
In the battle of Restart Protection,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Restart Protection on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Makita LS1018 operates at a blade speed of 4300 RPM, faster than Makita LS1019L's 3200 RPM. Higher RPM in LS1018 may deliver faster cuts but depends on the material and blade used.
Indicates the rotational speed of the blade during operation.
In the battle of Blade Speed,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
1,100.0 RPM
measurement.
Based on community votes for Blade Speed,
Makita LS1018 ◉ earned
1 votes,
more than
Makita LS1019L ◉,
which got 0 votes.
Both models require a tool for blade changes, meaning blade replacement is similar in complexity for Makita LS1018 and LS1019L.
Describes blade replacement method.
In the battle of Blade Change System,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
7 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Blade Change System on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Crown Molding Capacity
What is the crown molding capacity?
5.5
inch
0Votes
6.6
inch
0Votes
Makita LS1018
Maximum crown molding capacity is 5.5 inches, which is 13.97 cm, indicating the size of crown molding that can be cut flat on the saw table.
Makita LS1019L
Maximum crown molding capacity is 6.6 inch (≈ 16.76 cm), useful for determining if the saw will handle the trim profiles you plan to install.
Defines the maximum crown molding size that can be cut.
In the battle of Maximum Crown Molding Capacity,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
1.1 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Crown Molding Capacity on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Bevel Stops Count
How many bevel stops are available?
21
Makita LS1018
0Votes
0-5
24
Makita LS1019L
0Votes
0-5
Makita LS1018
The bevel stops count is between 0 to 5, meaning the saw has predefined angles where the bevel can be locked for accuracy and repeatability.
Makita LS1019L
Bevel stop range is 0-5, indicating preset detents for common bevel angles to speed up repeatable angle setup.
Indicates the number of preset bevel stops for precision.
In the battle of Bevel Stops Count,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
3 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Bevel Stops Count on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Sliding Cut Capacity
What is the sliding cut capacity?
12
inch
0Votes
12
inch
0Votes
Makita LS1018
Sliding cut capacity measures 12 inch, equating to 30.48 cm. This shows the maximum width of material the saw can cut in a single sliding motion.
Makita LS1019L
Sliding cut capacity is 12 inch (≈ 30.48 cm), indicating the maximum width of material that can be crosscut using the sliding rails.
Indicates additional cutting width enabled by sliding rails.
In the battle of Sliding Cut Capacity,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
12.00 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Sliding Cut Capacity on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Blade Diameter
What is the blade diameter?
10
inch
0Votes
10
inch
0Votes
vs
Blade Diameter
Both Makita LS1018 and LS1019L use 10 inch blade diameter, maintaining compatibility with standard 10 inch blades.
Indicates the blade size supported by the saw. Larger blades increase cutting capacity.
In the battle of Blade Diameter,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
10.00 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Blade Diameter on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Arbor Size
What is the arbor size?
0.6
inch
0Votes
5
inch
0Votes
vs
Arbor Size
The Arbor Size for Makita LS1018 is 0.6 inch, whereas LS1019L has a 5 inch arbor size. This large discrepancy suggests data inconsistency, so no conclusion can be drawn.
Specifies the arbor hole diameter required for blade mounting.
In the battle of Arbor Size,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Arbor Size on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Crosscut Capacity
What is the maximum crosscut capacity?
12
inch
0Votes
12
inch
0Votes
Makita LS1019L
Maximum crosscut capacity is 12 inch (≈ 30.48 cm), the largest 90° crosscut width when the saw is set up normally.
Represents the maximum crosscut cutting capacity across supported angles.
In the battle of Maximum Crosscut Capacity,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
12.00 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Crosscut Capacity on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Baseboard Capacity
What is the baseboard capacity?
6
inch
0Votes
6
inch
0Votes
Makita LS1019L
Maximum baseboard capacity is 6 inch (≈ 15.24 cm), indicating the largest baseboard profile the saw can cut vertically without repositioning.
Indicates the maximum baseboard height supported vertically.
In the battle of Maximum Baseboard Capacity,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
6.00 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Baseboard Capacity on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Laser Guide Type
What type of laser guide does it use?
0
Makita LS1018
0Votes
None
44
Makita LS1019L
0Votes
Single Line
Makita LS1019L
Includes a Single Line laser guide to help align cuts quickly and visually when setting up workpieces.
Indicates type of cutline guidance system.
In the battle of Laser Guide Type,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
44 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Laser Guide Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
LED Cutline Light
Does it include LED cutline light?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Makita LS1019L
An LED cutline light is fitted to illuminate the blade path, improving visibility of the cut line in low-light conditions.
Illuminates cutting area for improved visibility.
In the battle of LED Cutline Light,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
LED Cutline Light on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Blade Material Compatibility
What materials can it cut?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
44
Makita LS1019L
0Votes
Wood
vs
Blade Material Compatibility
Makita LS1018 does not specify blade material compatibility, while Makita LS1019L is compatible with wood blades, making LS1019L more specific in blade material use.
Lists the materials that can be safely cut with compatible blades.
Don’t keep it to yourself — be the first to react and review the
Blade Material Compatibility on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Vertical Cut Capacity
What is the maximum vertical cut capacity?
6
inch
0Votes
5.25
inch
0Votes
Indicates maximum vertical cutting height supported.
In the battle of Maximum Vertical Cut Capacity,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
0.8 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Vertical Cut Capacity on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Bevel Direction
What is the bevel direction capability?
61
Makita LS1018
0Votes
Single Bevel
94
Makita LS1019L
0Votes
Dual Bevel
Indicates whether bevel cuts are supported on one or both sides.
In the battle of Bevel Direction,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
33 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Bevel Direction on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Bevel Angle Left
What is the maximum left bevel angle?
45
degree
0Votes
47
degree
0Votes
Specifies maximum left bevel angle range.
In the battle of Maximum Bevel Angle Left,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
2.0 degree
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Bevel Angle Left on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Bevel Angle Right
What is the maximum right bevel angle?
45
degree
0Votes
47
degree
0Votes
Specifies maximum right bevel angle range.
In the battle of Maximum Bevel Angle Right,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
2.0 degree
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Bevel Angle Right on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Miter Angle Left
What is the maximum left miter angle?
45
degree
0Votes
60
degree
0Votes
Indicates maximum left miter rotation range.
In the battle of Maximum Miter Angle Left,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
15.0 degree
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Miter Angle Left on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Miter Angle Right
What is the maximum right miter angle?
45
degree
0Votes
60
degree
0Votes
Indicates maximum right miter rotation range.
In the battle of Maximum Miter Angle Right,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
15.0 degree
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Miter Angle Right on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Positive Miter Stops Count
How many positive miter stops are available?
21
Makita LS1018
0Votes
0-5
44
Makita LS1019L
0Votes
6-10
Specifies the number of preset miter stops for quick angle adjustments.
In the battle of Positive Miter Stops Count,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
23 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Positive Miter Stops Count on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Blade
Is a blade included?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates whether a blade is included in the package.
In the battle of Blade,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Blade on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Maximum Nested Crown Capacity
What is the maximum nested crown capacity?
5.5
inch
0Votes
6
inch
0Votes
Defines maximum crown molding size when cut nested.
In the battle of Maximum Nested Crown Capacity,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
0.5 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Maximum Nested Crown Capacity on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Makita LS1018 lacks Fine Miter Adjustment, but LS1019L includes this feature, offering finer control for precise angle settings, favoring LS1019L for accuracy.
Enables precise incremental miter tuning.
In the battle of Fine Miter Adjustment,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Based on community votes for Fine Miter Adjustment,
Makita LS1018 ◉ earned
0 votes,
less than
Makita LS1019L ◉,
which got 1 votes.
Makita LS1018 does not have a Work Clamp, but LS1019L includes one, providing better material stability during cuts and making LS1019L safer and more precise.
Indicates whether a work clamp is provided.
In the battle of Work Clamp,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Work Clamp on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Dual Bevel Capability
Does it have dual bevel capability?
Yes
0Votes
Makita LS1018
Yes
1Votes
Makita LS1019L
vs
Dual Bevel Capability
Dual Bevel Capability exists on both saws, Makita LS1018 and LS1019L, supporting multi-angle bevel cuts for versatile projects.
Indicates ability to bevel in both directions without flipping material.
In the battle of Dual Bevel Capability,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Based on community votes for Dual Bevel Capability,
Makita LS1018 ◉ earned
0 votes,
less than
Makita LS1019L ◉,
which got 1 votes.
Both saws have dual bevel capability which is pretty necessary for angled cuts but I prefer the LS1019L for other features.
See more
Bevel Adjustment Type
What type of bevel adjustment does it have?
71
Makita LS1018
0Votes
Front Knob
14
Makita LS1019L
0Votes
Front Knob
Makita LS1018
The bevel adjustment uses a Front Knob type, allowing users to easily adjust the bevel angle from the front side, which is ergonomically convenient.
Indicates how bevel angle adjustments are controlled.
In the battle of Bevel Adjustment Type,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
57 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Bevel Adjustment Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Rail Orientation
What is the rail orientation?
21
Makita LS1018
0Votes
Rear Rail
34
Makita LS1019L
0Votes
Rear Rail
Makita LS1018
The rail orientation is Rear Rail, indicating that the sliding rails are located at the back of the saw base. This allows for a compact front-to-back footprint and easier access to the workpiece.
Describes the direction or mechanism of rail movement.
In the battle of Rail Orientation,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
13 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Rail Orientation on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Table Extension Length
What is the table extension length?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
12
inch
0Votes
Makita LS1019L
Table extension length is 12 inch (≈ 30.48 cm), providing extra support for handling longer workpieces during cutting.
Specifies additional support length when extensions are deployed.
Don’t keep it to yourself — be the first to react and review the
Table Extension Length on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Miter Detent Plate Type
What type of miter detent plate is used?
41
Makita LS1018
0Votes
Stainless Steel
64
Makita LS1019L
0Votes
Stainless Steel
Describes the construction and adjustability of the miter detent system.
In the battle of Miter Detent Plate Type,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
23 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Miter Detent Plate Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Fence Type
What type of fence does it use?
21
Makita LS1018
0Votes
Standard Fence
54
Makita LS1019L
0Votes
Tall Sliding Fence
Defines the fence configuration supporting workpieces.
In the battle of Fence Type,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
33 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Fence Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Fence Height
What is the fence height?
4
inch
0Votes
4
inch
0Votes
Specifies vertical support height of the fence.
In the battle of Fence Height,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
, delivering
equal
4.00 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Fence Height on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Sliding Rail System
Does it have a sliding rail system?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates whether the saw uses sliding rails for extended cuts.
In the battle of Sliding Rail System,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Sliding Rail System on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Micro Bevel Adjustment
Does it support micro bevel adjustment?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Allows fine incremental bevel angle tuning.
In the battle of Micro Bevel Adjustment,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Micro Bevel Adjustment on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Angle Lock System
What type of angle lock system is used?
61
Makita LS1018
0Votes
Cam Lock
44
Makita LS1019L
0Votes
Cam Lock
Defines the locking mechanism securing angle settings.
In the battle of Angle Lock System,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
17 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Angle Lock System on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Table Extension Wings
Does it include table extension wings?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates presence of side extensions for longer materials.
In the battle of Table Extension Wings,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Table Extension Wings on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Crown Molding Stop
Does it include crown molding stops?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates whether crown molding stops are included for repeatability.
In the battle of Crown Molding Stop,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Crown Molding Stop on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Depth Stop
Does it have a depth stop?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Allows controlled trenching and repeated depth cuts.
In the battle of Depth Stop,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Depth Stop on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Trenching Capability
Does it support trenching capability?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
vs
Trenching Capability
Both Makita LS1018 and LS1019L do not offer Trenching Capability, limiting their use for groove cutting applications.
Indicates ability to perform trench or dado-style cuts.
In the battle of Trenching Capability,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Trenching Capability on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Calibration Adjustment Access
Can it be recalibrated easily?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
vs
Calibration Adjustment Access
Neither Makita LS1018 nor LS1019L provide Calibration Adjustment Access, meaning users cannot easily recalibrate the cutting angle.
Indicates whether users can recalibrate angles when needed.
In the battle of Calibration Adjustment Access,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Calibration Adjustment Access on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Makita LS1018 does not have Metal Gear Construction, but LS1019L does, enhancing LS1019L's gear durability and longevity in demanding jobs.
Indicates internal gears are made of metal for durability.
In the battle of Metal Gear Construction,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Metal Gear Construction on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Makita LS1018 lacks a Reinforced Pivot Mechanism, whereas LS1019L includes it, offering enhanced durability and stability in blade movement, favoring LS1019L for rugged use.
Strengthens pivot points to maintain alignment over time.
In the battle of Reinforced Pivot Mechanism,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Reinforced Pivot Mechanism on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Base Material
What is the base material?
51
Makita LS1018
0Votes
Cast Aluminum
84
Makita LS1019L
0Votes
Cast Aluminum
Makita LS1018
The base is made of cast aluminum, providing a strong yet lightweight foundation for stable cutting.
Makita LS1019L
The base material is Cast Aluminum, offering rigidity with less weight than steel for a good strength-to-weight balance.
Defines the structural material of the saw base for stability.
In the battle of Base Material,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
33 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Base Material on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Blade Guard Material
What is the blade guard material?
71
Makita LS1018
0Votes
Polycarbonate
84
Makita LS1019L
0Votes
Composite
Makita LS1018
The blade guard is constructed from Polycarbonate, a durable and impact-resistant plastic that provides safety while allowing visibility.
Defines material used for blade protection guard.
In the battle of Blade Guard Material,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
13 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Blade Guard Material on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Gear Housing Material
What is the gear housing material?
31
Makita LS1018
0Votes
Metal
54
Makita LS1019L
0Votes
Cast Aluminum
Makita LS1018
The gear housing is made of metal, providing durability and resistance to damage from heavy use.
Specifies housing material protecting internal gears.
In the battle of Gear Housing Material,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
23 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Gear Housing Material on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Reinforced Arm Construction
Does it have reinforced arm construction?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Makita LS1019L
Reinforced arm construction is present, which improves rigidity and reduces deflection during cuts for better accuracy and durability.
Shows whether the cutting arm includes structural reinforcement.
In the battle of Reinforced Arm Construction,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Reinforced Arm Construction on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Table Material
What is the table material?
71
Makita LS1018
0Votes
Cast Aluminum
94
Makita LS1019L
0Votes
Cast Aluminum
Specifies the material of the cutting table surface.
In the battle of Table Material,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
23 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Table Material on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Fence Material
What is the fence material?
51
Makita LS1018
0Votes
Aluminum
44
Makita LS1019L
0Votes
Aluminum
Indicates material composition of the fence system.
In the battle of Fence Material,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
7 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Fence Material on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Handle Material
What is the handle material?
91
Makita LS1018
0Votes
Rubber Overmold
84
Makita LS1019L
0Votes
Rubber Overmold
Indicates ergonomic handle material composition.
In the battle of Handle Material,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
7 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Handle Material on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Dust Port Material
What is the dust port material?
41
Makita LS1018
0Votes
Plastic
34
Makita LS1019L
0Votes
Plastic
Indicates construction material of the dust port.
In the battle of Dust Port Material,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
7 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Dust Port Material on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Corrosion Resistant Coating
Does it have corrosion resistant coating?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates presence of anti-corrosion surface treatment.
In the battle of Corrosion Resistant Coating,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Corrosion Resistant Coating on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Impact Resistant Components
Are components impact resistant?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates resistance to accidental drops and impacts.
In the battle of Impact Resistant Components,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Impact Resistant Components on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Sealed Bearings
Does it use sealed bearings?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Protects internal bearings from dust and debris.
In the battle of Sealed Bearings,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Sealed Bearings on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Heavy Duty Rating
Is it rated for heavy duty use?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
vs
Heavy Duty Rating
Neither Makita LS1018 nor LS1019L have a Heavy Duty Rating, so neither is explicitly rated for extreme industrial workloads.
Indicates suitability for prolonged heavy workload use.
In the battle of Heavy Duty Rating,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Heavy Duty Rating on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Weather Resistant
Is it weather resistant?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
vs
Weather Resistant
Both saws do not feature Weather Resistance, so users should avoid exposure to wet or harsh outdoor conditions.
Indicates resistance to moisture and outdoor conditions.
In the battle of Weather Resistant,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Weather Resistant on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Industrial Grade Classification
Is it industrial grade?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
vs
Industrial Grade Classification
Neither Makita LS1018 nor LS1019L have Industrial Grade Classification, suggesting neither is rated specifically for heavy industrial use.
Specifies whether it meets industrial-grade standards.
In the battle of Industrial Grade Classification,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Industrial Grade Classification on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Makita LS1018 is slightly wider at 33.1 inches compared to LS1019L's 31.75 inches, making LS1019L a bit more compact and easier to fit in constrained workspaces.
Overall operational width of the saw.
In the battle of Width,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
higher
1.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Width on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Package Height is 15 inches for Makita LS1018 and 21.6 inches for LS1019L, indicating LS1018 is generally more compact for storage and shipping.
Height of retail packaging box.
In the battle of Package Height,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
lower
6.6 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Height on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Package Width
What is the package width?
20
inch
0Votes
32.6
inch
0Votes
Makita LS1018
The package width is 20 inch which converts to approximately 50.8 cm. This dimension refers to the width of the boxed product for shipping or storage.
Makita LS1019L
Package width is 32.6 inch (≈ 82.80 cm), which helps assess shipping dimensions and pallet planning.
Width of retail packaging box.
In the battle of Package Width,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
lower
12.6 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Width on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Depth
What is the overall depth?
19
inch
0Votes
25.38
inch
0Votes
Makita LS1019L
Depth is 25.38 inch (≈ 64.47 cm), important to confirm when fitting the saw into constrained benches or transport spaces.
Overall operational depth from front to back.
In the battle of Depth,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
lower
6.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Depth on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Height
What is the overall height?
19.5
inch
0Votes
26
inch
0Votes
Makita LS1019L
Overall height is 26 inch (≈ 66.04 cm), a useful dimension when planning storage or determining clearance above the saw.
Overall operational height of the unit.
In the battle of Height,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
lower
6.5 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Height on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Folded Depth
What is the folded depth?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
25
inch
0Votes
Makita LS1019L
Folded depth is 25 inch (≈ 63.50 cm), which gives a practical footprint dimension for storage planning or transport considerations.
Depth when saw is folded for transport.
Don’t keep it to yourself — be the first to react and review the
Folded Depth on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Product Weight
What is the product weight?
43.7
lbs
0Votes
57.9
lbs
0Votes
Makita LS1019L
Product weight is 57.9 lbs (≈ 26.27 kg); expect a substantial, stable tool that may require two people to lift safely.
Net weight of the saw without packaging.
In the battle of Product Weight,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
lower
14.2 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Product Weight on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Base Footprint Width
What is the base footprint width?
18
inch
0Votes
21
inch
0Votes
vs
Base Footprint Width
The Base Footprint Width is 18 inches for Makita LS1018 and 21 inches for LS1019L, meaning LS1018 takes up less bench space, better for limited area setups.
Width of base contact area for stability and mounting.
In the battle of Base Footprint Width,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
lower
3.0 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Base Footprint Width on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Folded Width
What is the folded width?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
15
inch
0Votes
Width when saw is folded for storage or transport.
Don’t keep it to yourself — be the first to react and review the
Folded Width on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Folded Height
What is the folded height?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
17
inch
0Votes
Height when saw is folded.
Don’t keep it to yourself — be the first to react and review the
Folded Height on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Package Depth
What is the package depth?
20
inch
0Votes
22
inch
0Votes
Depth of retail packaging box.
In the battle of Package Depth,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
lower
2.0 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Depth on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Table Height
What is the table height?
4
inch
0Votes
3.5
inch
0Votes
vs
Table Height
The Table Height is taller on Makita LS1018 at 4 inches than 3.5 inches on LS1019L, which could influence ergonomics and material support during cutting.
Height of the cutting table from base reference.
In the battle of Table Height,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
0.5 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Table Height on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
In the battle of Smooth Start Mechanism,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Smooth Start Mechanism on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Sound Dampening Design
Does it feature sound dampening design?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates built-in sound reduction construction elements.
In the battle of Sound Dampening Design,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Sound Dampening Design on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Noise Reduction Technology
Does it include noise reduction technology?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates specialized engineering to reduce acoustic output.
In the battle of Noise Reduction Technology,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Noise Reduction Technology on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Balanced Armature System
Does it use a balanced armature system?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Improves internal balance to reduce vibration during cutting.
In the battle of Balanced Armature System,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Balanced Armature System on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
In the battle of Spark Suppression System,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Spark Suppression System on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Dust Collection Port
Does it have a dust collection port?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Makita LS1018
Dust collection port is included, allowing connection to dust extraction systems for cleaner operation.
Makita LS1019L
A dust collection port is provided to attach a vacuum or dust bag, helping keep the work area cleaner and reducing airborne dust.
Indicates presence of port for dust extraction system.
In the battle of Dust Collection Port,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Dust Collection Port on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Kickback Protection
Does it include kickback protection?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Makita LS1019L
Kickback protection is provided, which reduces the likelihood of sudden material ejection and improves user safety during operation.
Reduces risk of material kickback during cutting.
In the battle of Kickback Protection,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Kickback Protection on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
OSHA Compliance
Is it OSHA compliant?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Makita LS1018
This product complies with OSHA standards, ensuring it meets workplace safety requirements.
Indicates compliance with OSHA safety regulations.
In the battle of OSHA Compliance,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
OSHA Compliance on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Blade Guard Type
What type of blade guard does it use?
71
Makita LS1018
0Votes
Retractable
24
Makita LS1019L
0Votes
Transparent
Defines the protective guard system covering the blade.
In the battle of Blade Guard Type,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
47 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Blade Guard Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Safety Trigger Lock
Does it have a safety trigger lock?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Prevents accidental startup by locking trigger activation.
In the battle of Safety Trigger Lock,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Safety Trigger Lock on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Spindle Lock
Does it include a spindle lock?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Allows safe and easy blade replacement by locking spindle rotation.
In the battle of Spindle Lock,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Spindle Lock on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Dust Collection Efficiency
What is the dust collection efficiency?
50
%
0Votes
Who knows?
0Votes
Makita LS1019L
(Help us out by suggesting one!)
Represents effectiveness of dust extraction during operation.
Don’t keep it to yourself — be the first to react and review the
Dust Collection Efficiency on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Emergency Stop
Does it include an emergency stop?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Allows immediate shutdown in emergency situations.
In the battle of Emergency Stop,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Emergency Stop on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Overheat Protection
Does it have overheat protection?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Automatically shuts off motor if overheating occurs.
In the battle of Overheat Protection,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Overheat Protection on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Anti Restart Protection
Does it feature anti-restart protection?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Prevents automatic restart after power interruption.
In the battle of Anti Restart Protection,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Anti Restart Protection on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
UL Listed
Is it UL listed?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates certification under UL safety testing standards.
In the battle of UL Listed,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
UL Listed on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Indicates whether official replacement parts are widely available.
In the battle of Replacement Parts Availability,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Replacement Parts Availability on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Indicates access points for dust and debris cleaning.
In the battle of Cleaning Access Ports,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Cleaning Access Ports on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Replaceable Carbon Brushes
Are the carbon brushes replaceable?
No
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Makita LS1019L
Replaceable carbon brushes are present, allowing the brushes to be serviced or replaced without changing the whole motor assembly.
This can extend the service life of the motor and make maintenance simpler for repair technicians.
Indicates if carbon brushes can be replaced when worn.
In the battle of Replaceable Carbon Brushes,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Replaceable Carbon Brushes on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Brush Access Design
What type of brush access design does it use?
91
Makita LS1018
0Votes
External Access
74
Makita LS1019L
0Votes
External Access
Describes how carbon brushes can be accessed for maintenance.
In the battle of Brush Access Design,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
17 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Brush Access Design on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Lubrication Required
Does it require lubrication?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates whether periodic lubrication is required.
In the battle of Lubrication Required,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Lubrication Required on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Service Interval Recommendation
What is the recommended service interval?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
Who knows?
0Votes
Makita LS1019L
(Help us out by suggesting one!)
Specifies the recommended number of operating hours before service.
Don’t keep it to yourself — be the first to react and review the
Service Interval Recommendation on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Warranty Service Type
What type of warranty service is provided?
71
Makita LS1018
0Votes
On Site
64
Makita LS1019L
0Votes
On Site
Describes how warranty repairs are handled.
In the battle of Warranty Service Type,
Makita LS1018 ◉ is
better than
Makita LS1019L ◉
, delivering
higher
7 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Warranty Service Type on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Diagnostic Indicator
Does it include a diagnostic indicator?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates presence of system diagnostics or warning indicators.
In the battle of Diagnostic Indicator,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Diagnostic Indicator on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Indicates compatibility with mobile tool carts for transport.
In the battle of Mobile Cart Compatible,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Mobile Cart Compatible on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Mounting Hole Pattern
What is the mounting hole pattern?
41
Makita LS1018
0Votes
4-Hole
94
Makita LS1019L
0Votes
Universal
Makita LS1018
The mounting hole pattern has 4 holes for secure attachment to stands or tables, suitable for stability during operation.
Describes the pattern of mounting holes for securing the saw to a stand or surface.
In the battle of Mounting Hole Pattern,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
53 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Mounting Hole Pattern on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Bench Mountable
Can it be bench mounted?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
Who knows?
0Votes
Makita LS1019L
(Help us out by suggesting one!)
Makita LS1018
Bench mounting capability allows secure attachment to a workbench, enhancing stability during use.
Indicates whether the saw can be securely mounted to a bench.
Don’t keep it to yourself — be the first to react and review the
Bench Mountable on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Stand Compatible
Is it stand compatible?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates whether the saw is compatible with external miter saw stands.
In the battle of Stand Compatible,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Stand Compatible on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Stand
Is a stand included?
No
0Votes
Makita LS1018
No
0Votes
Makita LS1019L
Indicates whether a compatible stand is included in the package.
In the battle of Stand,
Makita LS1018 ◉ is
same as
Makita LS1019L ◉
.
Don’t keep it to yourself — be the first to react and review the
Stand on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Compatible Blade Types
What blade types are compatible?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
Who knows?
0Votes
Makita LS1019L
(Help us out by suggesting one!)
Lists blade types supported by the saw.
Don’t keep it to yourself — be the first to react and review the
Compatible Blade Types on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Vacuum Adapter
Is a vacuum adapter included?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates whether a vacuum adapter is included for dust extraction.
In the battle of Vacuum Adapter,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Vacuum Adapter on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Table Mountable
Can it be table mounted?
Yes
0Votes
Makita LS1018
Yes
0Votes
Makita LS1019L
Indicates whether the saw can be mounted directly to a worktable.
In the battle of Table Mountable,
Makita LS1018 ◉ is
worse than
Makita LS1019L ◉
, delivering
lower
4 score
measurement.
Don’t keep it to yourself — be the first to react and review the
Table Mountable on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Extension Support Compatibility
Is it compatible with extension supports?
Who knows?
0Votes
Makita LS1018
(Help us out by suggesting one!)
Who knows?
0Votes
Makita LS1019L
(Help us out by suggesting one!)
Indicates compatibility with external material support extensions.
Don’t keep it to yourself — be the first to react and review the
Extension Support Compatibility on Makita LS1018 ◉
vs Makita LS1019L ◉ and help others decide!
Supermod
Moderator
Recaptor
